On a hot summer Thursday, a crowd of parents gathered on a bench at Churchill Meadows Park in Mississauga, Ontario. As they rested with their backs against the glazed wall of the site’s newly completed community center, watching their kids in the adjacent playground, they were protected by an airy overhang on the building’s west facade that serves as a shading device, shielding them from the intensity of the sun without blocking its light. This 200-foot-long expanse of aluminum mesh, supported by spruce glulam (GLT) framing, runs along the whole length of the building—a heroic gesture that’s also thoroughly hospitable.

A sculptural standing-seam metal skin on the east side faces vehicular traffic. Photo © Scott Norsworthy, click to enlarge.

Designed by the Toronto firm MJMA, Churchill Meadows includes the 73,500-square-foot steel and concrete structure and the attached 35-acre park. The building’s singular architecture was designed to bring the two parts of the project together, says MJMA partner Ted Watson, who led the project with founding partner David Miller and principal Chris Burbidge. “That was the opening gambit,” Watson says. “How can the park be better for the building, and how can the building be better for the park?”

The building’s east half houses the changing rooms at grade, with a kitchen, mechanicals, and viewing and multipurpose areas on a second floor. Photo © Scott Norsworthy

MJMA’s answer to that question was to treat the large structure as a pavilion: they made it a highly transparent monolithic bar and oriented it north–south, squarely on the park. Inside, a double-height lobby at its center connects visually to the landscape beyond. It is flanked by sports facilities: to the south is a triple gym; to the north, an aquatic center with a six-lane, 25-meter lap pool and a leisure pool. A grand stair made of GLT leads up to a second floor that runs along the east side of the building. This balcony-like space provides glazed viewing areas and access to community rooms, workout studios, and a kitchen. A large mechanical room is also tucked in here, concealing pool ventilation equipment that would otherwise mar the landscape.

A central doubleheight lobby (1) is flanked by the glazed and skylit sports facilities: a gymnasium to the south side (2) and pools to the north (3). Photos © Scott Norsworthy

All of these rooms have been well used since the center opened during the pandemic, says Raj Sheth, Mississauga’s director of facilities and property management. The center sits on the western edge of the suburban city of over 800,000 people that borders Toronto. The site, formerly a farm, had been put aside by the municipality for a new park, but rapid growth in the area, home to many South Asian immigrants with multigenerational families, led civic officials to add a recreation center as well. “Typically, a park is built, and the community center comes later, and the two are quite separate,” Sheth explains. “This was a perfect storm, a chance for us to do both at the same time.”

MJMA, which specializes in this building type, won a unified contract for the entire project—the structure and grounds. The office also includes landscape architects, so the design team was able to work “in a totally integrated way,” says project architect Tyler Walker.

With control over the site plan, the designers placed the driveways and parking on the east of the building. The park is on the west side, sheltered from traffic, and includes a playground, sprinklers, sports courts, and a skate park. (Beyond these, soccer and cricket fields, as well as tennis courts, will be delivered in a future phase.)

Supported by the GLT structure, the mesh overhang reveals double-height pool and gym spaces. Photo © Scott Norsworthy

The building, despite its considerable bulk, has a minimal presence in the landscape. Its two main facades each wear a uniform white cladding. On the east side, standing-seam metal folds inward to frame windows into the community rooms and first-floor corridor. On what the architects have dubbed the “porch” to the west, expanded aluminum mesh wraps around the GLT members, modulating daylight while visually reducing the building’s scale. Seven triangular light monitors on the roof pull north rays down into the interior.

Inside, the architecture is just as rigorous and spatially inventive. Walker points to the “inverted landscape” of the pool ceiling—a range of peaks and valleys that manages sound reflections and modulates light from above. Even the GLT stair up to the second floor is a feat: it rises gently to the west and then switches back to the east on a long cantilevered span.

In a building that typically hosts from 1,200 to 1,500 people per day, these spatial moves are bold enough to demand attention. Sheth says users routinely comment on the building’s beauty. But it is the porch that wins the most praise from users. That warm-hued wood structure draped with diaphanous aluminum provides one clear visual idea all the way along the building. For visitors, this zone of overlap between indoors and outdoors sends a strong message. “Very clearly,” he says, “it is a place for people to come together.”

Architect: MJMA Architecture & Design 6-425 Adelaide Street West, Toronto, ON M5V 3C1 416-593-6796 www.mjma.ca

Personnel in architect's firm who should receive special credit: Design Partner: David Miller; Supporting Partners: Ted Watson, Tarisha Dolyniuk, Timothy Belanger, Andrew Filarski, Viktors Jaunkalns, Robert Allen. Principal-in-Charge: Chris Burbidge; Design Architect: Tyler Walker Design Team: Obinna Ogunedo, Leland Dadson, Kris Vassilev, Darlene Montgomery, Jasper Flores, Caleb Tsui, Natalia Ultremari, Jeremy Campbell, Caileigh MacKellar, Kyung-Sun Hur

Architect of record: MJMA Architecture & Design

Interior designer: MJMA Architecture & Design

Engineers: Structural: Blackwell Mechanical & Electrical: Smith + Andersen Civil: EMC Group

Consultants: Landscape: MJMA Architecture & Design Sports Field Landscape: John George Associates Experiential Graphic Design / Signage & Wayfinding: MJMA Architecture & Design

Structural System: Manufacturer of any structural components unique to this project: Nordic Structures: Glue-Laminated Timber and Cross-Laminated Timber Gensteel (supplier/installer): Steel structure – columns and roof framing Salit Steel (supplier/installer): Foundations Ideal Roofing (manufacturer), TLS Group (installer): Metal deck Coreslab Structures: Precast structural slabs

Exterior Cladding: Masonry: Richvale York “Cambridge” series (architectural concrete block) Metal panels: Agway Metals AR standing seam panels Metal/glass curtain wall: Glass curtain wall by Aerloc Industries Rainscreen: Agway AR standing seam panels, Cavityrock by Rockwool (thermal insulation), Henry Blueskin (air-vapour barrier) Precast concrete: Precast benches by Canadian Precast Wood: Wood soffit by Geometrik Manufacturing Moisture barrier: Below-grade vapor barrier – “Perminator” by W.R.Meadows; Surface-applied crystalline waterproofing (elevator pits and surge tanks) – Vandex Super by The Euclid Chemical Company; Cold fluid-applied waterproofing (basement walls) – E.Protect Wall System by Epro; Bituminous damproofing (foundations) – Epro Curtain wall: Aerloc Industries

Roofing: Built-up roofing: Johns Manville

Glazing: Glass: Guardian Glass Skylights: Aerloc / Guardian Glass Insulated-panel or plastic glazing: Insulated glass units – Guardian Glass

Doors: Entrances: Aerloc Metal doors: Citywide Door & Hardware Wood doors: Lampton Doors (manufacturer); Trillium (installer) Sliding doors: Stanley Fire-control doors, security grilles: Aluflam (fire-rated door); Amstel (side coiling security grille) Special doors: Overhead coiling grilles by Amstel Manufacturing Upswinging doors, other: Overhead garage doors by Garaga

Hardware: Locksets: Sargent Manufacturing; GBI Industries (frameless glass doors); Assa Abloy Closers: Dorma (overhead concealed and floor concealed); Sargent Manufacturing Exit devices: Dorma (all glass doors); Assa Abloy Pulls: Dormakaba (locking ladder pulls); Gallery Specialty Hardware Security devices: Assa Abloy Swing door operators (header or in-floor): Assa Abloy

Interior Finishes: Acoustical ceilings: Techstyle by Hunter Douglas/CertainTeed; Perforated metal panels by Gordon Inc. Suspension grid: Steel studs by Bailey; Standard grid by CertainTeed Demountable partitions: Corflex Operable Partitions Cabinetwork and custom woodwork: by Allwood Paints and stains: PPG Industries; Sansin (mass timber coating) Wall coverings: Architectural concrete block by Richvale York Paneling: Wood Panel Ceiling by Geometrik Manufacturing Plastic laminate: Part of millwork by Allwood Solid surfacing: Part of millwork by Allwood Special surfacing: Wood athletic flooring by Connor Sports (manufacturer) / WestPoint (supplier and installer); Tackboards by Global School Products Floor and wall tile: Floor tiles by Mosa Tiles and by American Olean; Wall tiles by Centura / Max Glory; Mosaic wall tile by Daltile Resilient flooring: by American Biltrite Carpet: by Interface Special interior finishes unique to this project: Art Wall – consists of 675 tiles painted by members of the local community

Furnishings: Office furniture: NIC Reception furniture: Millwork by Allwood Fixed seating: Millwork by Allwood Chairs: NIC Tables: NIC Furniture: Exterior benches and seating by Maglin, Mmcite/Open Space Solutions, W.H. Reynolds Bike racks: Green Blue Urban

Lighting: Interior ambient lighting: SGI Lighting; Visioneering / Salex (supplier) Downlights: Meteor Lighting; V2 Lighting Group Exterior: Poles: Gardco PureForm by Seginus Lighting; Poles by Alumnous with light fixtures by Phillips; Exterior perimeter light fixtures by Insight Lighting Dimming system or other lighting controls: Wattstopper / Salex (supplier)

Conveyance: Elevators/escalators: Thyssenkrupp – Hydraulic passenger elevators

Plumbing: Toilets, urinals, lavatories: American Standard Showers, faucets: Delta

Energy: Unique products that contribute to sustainability:

Alex Bozikovic is the architecture critic for The Globe and Mail and author of Toronto Architecture: A City Guide.

You must have JavaScript enabled to enjoy a limited number of articles over the next 30 days.

Sponsored Content is a special paid section where industry companies provide high quality, objective, non-commercial content around topics of interest to the Architectural Record audience. All Sponsored Content is supplied by the advertising company. Interested in participating in our Sponsored Content section? Contact your local rep.

Credits: 1 AIA LU/HSW; 1 AIBD P-CE; 0.1 IACET CEU May qualify for learning hours through most Canadian architectural associations

This presentation will explore fresh, new innovative concepts for appropriate systematic solutions, as well as guidelines and recommendations for the housing of these resources.

Credits: 1 AIA LU/HSW; 1 AIBD P-CE; 0.1 IACET CEU May qualify for learning hours through most Canadian architectural associations

This course will review the latest standards in glass entrance design along with key considerations for hardware selection across various applications including storefronts, point-supported glass walls and transoms with floating headers.

Copyright ©2022. All Rights Reserved BNP Media.

Design, CMS, Hosting & Web Development :: ePublishing